Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Rancho Cucamonga, CA
Cabinet installation replaces your existing cabinets entirely with new boxes, doors, and hardware. Refacing keeps the boxes in place and replaces only the doors, drawer fronts, and visible face frames – dropping cost by roughly 40 to 60 percent while producing a result that looks like a full replacement from across the room. For most Rancho Cucamonga kitchens built between the mid-1990s and early 2010s, the boxes are still structurally sound, which makes refacing the more practical call. If the boxes are water-damaged, out of square, or simply too small for the layout you want, installation is the right path.
At Rowan Construction Group Rancho Cucamonga, every cabinet project starts with a written price and a written scope before anyone touches a cabinet. That’s not a policy we revisit case by case – it’s Clause 1 of the Haven Standard, and it applies to a single bathroom vanity and a full kitchen overhaul the same way. Grant Rowan built this company on that discipline in 2007, and we’ve delivered it across 4,000-plus projects since. If you’d like to see what that looks like for your kitchen, call us at (909) 373-9612 – estimates are free, and the price is in writing before we schedule a crew.
Cabinet work sits inside our broader Kitchen Remodeling in Rancho Cucamonga service, so if your project grows to include countertops, a new layout, or appliance repositioning, we handle it under one contract and one documented scope – not a stack of verbal agreements.
When You Need Cabinet Installation & Refacing
- Doors that won’t close flush or drawers that bind in summer humidity. The Inland Empire’s temperature swings – 100-degree July afternoons followed by cooler desert nights – cause wood frames to expand and contract repeatedly. In older Rancho Cucamonga tracts like Alta Loma and Etiwanda, we regularly find hinge mounts that have pulled out of the face frame because the wood cycled too many times without adjustment. Refacing replaces those compromised frames before the problem migrates to the box itself.
- Water damage at the toe kick or under the sink cabinet. A slow dishwasher leak or a supply line drip can rot a box bottom over months before the homeowner notices. If the damage is isolated to one or two sections, targeted installation of new boxes – rather than a full kitchen replacement – is often the right scope.
- Finishes that are peeling, yellowed, or visibly dated. The flat-panel oak cabinets common in Rancho Cucamonga homes built during the 1990s boom don’t need new boxes – they need new doors, new drawer fronts, and a veneer on the face frame. Refacing gets that done in two to three days versus the one to two weeks a full installation requires.
- A layout that doesn’t work anymore. If you’ve converted a dining room to a home office or added a household member, the storage configuration that made sense in 2005 probably doesn’t now. Installation lets us relocate upper cabinets, add a pantry column, or change a peninsula to an island in a way refacing cannot.
- Preparing a home for sale in a market that rewards kitchens. Rancho Cucamonga resale prices in neighborhoods like Victoria Groves and Caryn respond measurably to updated kitchens. Refacing is the lower-cost way to get there when the layout is already buyer-friendly.
- A kitchen remodel where only the cabinets are the bottleneck. Sometimes the countertop, appliances, and flooring are already updated and the cabinets are the one element that dates the room. Refacing handles that without touching anything that’s already right.
Our Cabinet Installation & Refacing Process
- On-site measurement and condition assessment. A Rowan crew member visits the kitchen, measures every cabinet opening and ceiling height, checks the boxes for square, and inspects the substrate – the wall behind the cabinets, the toe kick condition, and the plumbing and electrical clearances that affect where new boxes can land. We photograph everything at this stage. That documented photo record is a standard deliverable on every Rowan visit, not an add-on, so you have a baseline record of what we found before we touched anything.
- Written scope and flat price delivered before scheduling. Based on the measurement visit, we produce a written quote that names the cabinet line – whether that’s KraftMaid, Wellborn, or another sourced brand from our network of 50-plus vetted suppliers – the door style, the finish, and the hardware spec, along with a flat price and a written warranty. No change proceeds after this point without a signed change order. That’s not a formality; it’s the discipline that has kept Rowan’s projects within a few percent of the agreed cost across every job we’ve done since 2007.
- Material ordering and lead-time confirmation. Semi-custom cabinet lines typically run three to five weeks from order to delivery in the current supply environment. Stock cabinet programs can be on-site in days. We confirm the lead time in writing so you can plan the kitchen downtime accurately. If the project includes refacing materials, we order the veneer and door blanks at the same time and hold delivery until the job date is confirmed.
- Demolition or prep, depending on scope. For full installation, the existing cabinets come out. We document the wall condition behind them – drywall gaps, previous plumbing patches, any mold evidence from old leaks – and address anything that needs to be right before the new boxes go in. For refacing, we prep the existing face frames: cleaning, light sanding, and checking that every hinge mount is solid before we apply the new veneer.
- Installation or refacing, inspected to square and level. Cabinets are only as good as the wall they hang from. In Rancho Cucamonga, we regularly encounter walls that are not plumb due to the minor settling common in homes built on the sandy fill soils of the eastern San Bernardino Valley. We shim and level every upper cabinet run before fastening, and we pull a level across every base cabinet before the countertop substrate goes down. Every door and drawer is adjusted to close squarely before we call the installation stage complete.
- Final walkthrough and photo documentation. We walk the kitchen with you, open every door and drawer, confirm that the hardware is tight and the soft-close mechanisms are functioning, and take a final photo record. That set of photos is yours – it documents the completed condition and supports any warranty claim under the 365-Day Done Right Promise. If anything isn’t right at this stage, we make it right before the crew leaves or schedule the correction within 48 hours.
Before
AfterCabinet Installation & Refacing Pricing in Rancho Cucamonga
Cabinet refacing in Rancho Cucamonga typically runs $4,500 to $10,000 for an average kitchen of 20 to 30 linear feet. Full cabinet installation – new boxes, new doors, new hardware – runs $8,000 to $28,000 for the same footprint, depending on the cabinet line and the complexity of the layout. Those ranges reflect the Inland Empire market; they’re not national averages padded for safety margin.
| Scope | Typical Range (Rancho Cucamonga) | Key Variables |
|---|---|---|
| Refacing only (20-30 linear ft.) | $4,500 – $10,000 | Door material (thermofoil vs. solid wood), hardware spec, number of drawers |
| Stock cabinet installation | $8,000 – $14,000 | Number of uppers, layout changes, filler strips required |
| Semi-custom installation (KraftMaid, Wellborn) | $14,000 – $28,000 | Door style, finish, interior accessories, soft-close hardware throughout |
| Single cabinet replacement (vanity or pantry) | $600 – $2,200 | Cabinet size, wall prep condition, matching existing finish |
What moves a project toward the high end of a range: existing walls that need patching before boxes can go up, a layout change that requires moving a water line or a switched outlet, solid wood door styles rather than thermofoil or MDF, and interior accessories like pull-out shelves, lazy Susans, or built-in drawer organizers. What keeps costs toward the low end: boxes in good structural condition, a straightforward layout with no changes to plumbing or electrical, and a stock or thermofoil door program.
We also offer a Free Second Opinion on any written estimate. If another contractor has already quoted your cabinet project, bring that document to us and Grant Rowan will review it line by line at no charge – checking the scope, the brand specs, and the labor allowances against what the number actually covers. Call (909) 373-9612 to set that up.
FAQs – Cabinet Installation & Refacing
Is refacing worth it, or should I just replace the cabinets entirely?
Refacing is worth it when your existing cabinet boxes are square, structurally solid, and in the right position for your layout. In Rancho Cucamonga homes from the 1990s and 2000s, the boxes are often in good shape even when the finishes are not – which makes refacing the more cost-effective call. If the boxes are water-damaged, severely out of level, or you want to reconfigure the layout, full replacement is the right scope. We assess the box condition during the measurement visit and tell you which direction makes sense before any money changes hands. Call (909) 373-9612 to schedule that visit – it’s free.
How long does cabinet refacing take in Rancho Cucamonga?
Cabinet refacing for an average kitchen takes two to four days of on-site work. Full cabinet installation runs one to two weeks, including the time needed to prep walls and adjust for any plumbing or electrical clearances. Lead time for semi-custom cabinet orders adds three to five weeks before on-site work begins – we confirm that in writing when the kitchen design and layout is scoped so you’re not guessing about the kitchen being out of service.
What cabinet brands does Rowan Construction Group install?
We source from KraftMaid and Wellborn as our primary semi-custom lines, along with stock programs from our broader network of 50-plus vetted suppliers. The brand, door style, and finish are named in the written quote – not described loosely – so you know exactly what’s going on your walls before the order is placed. We don’t substitute materials without a signed change order acknowledging the substitution and adjusting the price accordingly.
Does the 365-Day Done Right Promise cover cabinet installation?
Yes. The 365-Day Done Right Promise covers all work Rowan Construction Group performs, including cabinet installation and refacing. If a door comes loose, a hinge fails, or a drawer stop malfunctions within 365 days of completion and it’s attributable to installation workmanship, we come back and make it right. The guarantee is printed on our contract and backed by the Haven Standard – not a handshake. Material manufacturer warranties apply separately and run alongside ours, not instead of them.
Why Rancho Cucamonga Homeowners Choose Rowan Construction Group
The cabinets in a Rancho Cucamonga kitchen remodeling project take more thermal stress than people expect. The eastern end of the San Gabriel Valley runs hot – regularly above 100 degrees from June through September – and the temperature drops sharply at night because of the desert air that flows down from the Cajon Pass. That daily cycling is harder on wood joints, drawer slides, and adhesive veneer bonds than it is in coastal climates. We’ve done enough cabinet work in this part of San Bernardino County to know where that stress shows up first: the upper cabinets on the south-facing wall, the drawer fronts nearest the range, and the toe kick on any cabinet adjacent to the dishwasher.
That’s not a pitch – it’s what the documented photo record from 17-plus years of Rancho Cucamonga projects shows us. Grant Rowan has been on job sites in Etiwanda, Alta Loma, Terra Vista, and Victoria Gardens-area neighborhoods long enough to know the difference between a settling crack and a structural problem, and that distinction changes the scope and the price.
Background-checked, uniformed technicians show up on every job. A live person answers calls 24/7 – not a voicemail box that routes to a callback queue. And no work proceeds on a change until you’ve signed a change order with the adjusted price in writing. That last point is what keeps a $12,000 project from becoming a $17,000 surprise.
The larger picture of what we do in kitchens lives on the home page, where you can see the full scope of trades we carry. Cabinet work is one piece of a kitchen remodel, and if your project ends up being more than cabinets, we handle the rest under the same contract discipline.
To get a written price for your cabinet project – installation, refacing, or a second opinion on a quote you already have – call (909) 373-9612. The estimate is free, the price is flat, and it’s in writing before anyone picks up a tool.
Written by Grant Rowan, Owner at Rowan Construction Group Rancho Cucamonga, serving Rancho Cucamonga since 2007.