IKO Driveway & Pavers Nationwide

IKO Driveway & Pavers: The Rancho Cucamonga Owner’s Guide

We stock and install IKO-compatible driveway and paver systems in Rancho Cucamonga, with paver driveway installations running $7,000-$18,000 and concrete driveway installations at $4,500-$12,000 depending on substrate condition and square footage. Most IKO paver replacement sections can be sourced within 24-48 hours, and we carry common edge restraints and bedding sand specs on our trucks. Homeowners usually discover a problem when they notice shifting or sinking along the driveway edge, water pooling where the grade used to drain, or individual pavers rocking underfoot - signs that the bedding layer or edge restraint has failed beneath the surface.

Call (909) 373-9612

Which IKO Models This Applies To

IKO’s hardscape line includes the Cambridge, Roman, and Old World series, plus the permeable Enviro pavers designed for California’s stormwater requirements. The Cambridge series uses a 60mm thickness standard, while Roman and Old World run 80mm - mixing these on the same plane creates a trip hazard and drainage issue we see often in Rancho Cucamonga’s older subdivisions near the foothills. To identify your series, flip a loose paver: the production stamp includes the series name, manufacturing date, and the IKO plant code (look for “IKO” followed by a two-letter region code). The OEM IKO edge restraint is a PVC snap-in profile, but we also install aluminum L-channel from Perma-Edge when the soil is expansive clay, which is common in the Baseline corridor. Aftermarket bedding sand should meet ASTM C33 gradation, not masonry sand - the particle size difference (2.36mm to 75µm range) determines how the joint sand locks under vibration. We source both OEM and spec-grade equivalents, and we’ll note which we’re quoting in the written scope.

Signs Your IKO Driveway & Pavers Is Failing

• Pavers rock or wobble underfoot. This means the bedding sand has washed out or compacted unevenly, often from irrigation overspray or a failed edge restraint that let the perimeter spread. The fix is lifting the affected area, re-screeding the bedding layer, and resetting - not just tapping down the loose piece.
• Water pools where it used to drain. Pooling indicates subsidence in the aggregate base, usually from inadequate compaction during original install or organic decomposition in the soil beneath. In Rancho Cucamonga, we see this where builders backfilled with native topsoil instead of imported aggregate.
• Edge pavers tipping outward or sinking. The edge restraint has failed - cracked plastic, rotted wood, or spikes pulled from wet soil. Once the edge goes, the field spreads laterally and the interlock is gone.
• Weeds growing through joint sand. Polymeric sand has degraded or was never installed; standard joint sand washes out and leaves voids. The weed is a symptom, but the underlying issue is loss of joint stabilization that transfers load between pavers.
• Chipped or spalled paver surfaces. IKO’s surface color layer is roughly 5-8mm thick; once it’s breached, the concrete body absorbs moisture and freezes in winter (yes, even in Rancho Cucamonga - we get frost at elevation). Spalling accelerates where de-icing salts are used.

Before

After

Replacement Cost & What’s Included

For IKO paver driveway replacement in Rancho Cucamonga, expect $7,000-$18,000 installed, with concrete driveway replacement at $5,000-$14,000 if the base is salvageable. The range depends on three things: how much of the base must be recompacted (we test with a plate compactor and nuclear density gauge), whether we need to match discontinued IKO colors (the Old World Autumn Blend was phased out in 2019), and permit requirements for impermeable surface limits in your specific tract. Our quote includes removal and disposal of existing material, imported Class 2 aggregate base at 4-6 inches, bedding sand, pavers, edge restraint, joint sand, and compaction to 95% modified Proctor. Under Clause 1 of the Haven Standard, you get the full written price before we start - no call-for-pricing, no allowance items that balloon later. The 365-Day Done Right Promise covers settling, joint sand loss, and edge restraint failure. We pull permits where required and pass inspection before final invoice.

DIY or Call Us?

There’s no high-tension danger with pavers, but there’s a lot of ways to waste money. An owner can safely check: whether the edge restraint is intact by probing with a screwdriver, whether drainage runs clear by flooding the surface with a hose, and whether individual pavers lift out by hand (if they do, the bedding layer is already failed). Where DIY goes wrong: plate compacting without knowing your soil type can fracture pavers if the amplitude is wrong; screeding bedding sand to the wrong depth (typically 1 inch for IKO 60mm, 1.25 inches for 80mm) creates voids that show up in six months; and matching IKO’s color blends by eye from a photo never works - the dye lots shift between production runs. We bring a moisture meter for the base, a laser grade checker, and the compaction log from our last dozen Rancho Cucamonga jobs so we know what this soil does. Call (909) 373-9612 and we’ll schedule a free estimate with a written scope.

FAQs