Cambria Home Additions & ADU Nationwide

Cambria Home Additions & ADU: The Rancho Cucamonga Owner’s Guide

We stock and install Cambria-compatible surfaces for home additions and ADU projects in Rancho Cucamonga, with typical installed pricing from $45,000 to $130,000 for full additions and $90,000 to $220,000 for detached ADUs. Every quote is written and itemized before work begins under Clause 1 of the Haven Standard. Most Rancho Cucamonga homeowners discover their Cambria surface needs attention when expansion joints crack from our 100-plus summer days, or when slab settling in the foothill zones near Day Creek creates stress fractures at the seam.

Call (909) 373-9612

Which Cambria Models This Applies To

Cambria’s quartz surfaces for residential construction fall into three series relevant to Rancho Cucamonga additions and ADUs: the Classic Collection (1.2 cm and 2 cm slabs, best for vertical applications and bathroom vanities), the Jewel Collection (2 cm and 3 cm, standard for kitchen islands and wet bars), and the Waterstone Collection (3 cm, specified for heavy-use countertops and integrated sinks). The part you’re matching is the slab thickness and finish, not a mechanical component. Check the underside edge for a stamped lot number and thickness callout. If you’re replacing a section in an existing addition, measure the exposed edge with a tape measure: 2 cm measures roughly 3/4 inch, 3 cm measures roughly 1-1/4 inch. Cambria’s color runs shift slightly between lots, so we source from the same production run when possible. We are an independent contractor, not affiliated with Cambria, and we quote both OEM Cambria slabs and comparable Silestone alternatives when the budget or timeline demands it. In Rancho Cucamonga’s Inland Empire market, we’ve found Silestone’s Eternal series matches Cambria’s thermal expansion rate within 2%, which matters when you’re tying a new ADU slab into an existing patio pour.

Signs Your Cambria Home Additions & ADU Is Failing

• Hairline cracks radiating from sink cutouts or cooktop openings. These start at stress concentrators where the quartz was field-cut. In Rancho Cucamonga, thermal cycling between August afternoons and January nights accelerates the propagation by roughly 30% compared to coastal installs.
• Visible seam separation or lippage at slab joints. The epoxy bond failed, usually from subfloor deflection or inadequate support beneath the cabinet run. We see this most often in second-story additions where the original framer sized joists for laminate, not stone.
• Cloudy or dull patches that don’t respond to cleaning. The resin binder has degraded from UV exposure through west-facing windows, or from prolonged contact with acidic cleaners. Cambria’s warranty excludes chemical damage, so replacement is the fix.
• Water staining or darkening at the underside of overhangs. The water barrier between slab and substrate has failed. In ADUs with crawl space ventilation, Rancho Cucamonga’s Santa Ana wind cycles pull moisture through gaps and wick it upward.
• Chipping at edges, especially on 2 cm profiles with small bevels. Impact damage from cast-iron cookware or from installers who didn’t ease the edge during original fabrication. The chip reveals the raw quartz aggregate beneath.

Before

After

Replacement Cost & What’s Included

For a Rancho Cucamonga home addition or ADU using Cambria surfaces, expect $45,000-$130,000 for the full addition structure and finish, with countertop and surface work typically comprising $2,000-$6,500 of that total as a standalone line item. The range depends on slab thickness, edge profile complexity (ogee and waterfall edges add fabrication hours), and whether we’re matching existing stone in a partial replacement. Our written quote separates material, fabrication, and installation so you see where the money goes. We pull permits and schedule inspections as part of the scope, not as a surprise add-on. The 365-Day Done Right Promise covers the installation; Cambria’s own limited lifetime warranty covers the slab material against manufacturing defects. We document the substrate condition, the slab lot number, and the finished seam alignment with photos before we leave. No change to the scope happens without a signed change order, which is how we’ve kept projects within a few percent of the written price since 2007.

DIY or Call Us?

There’s no dangerous tension or electrical hazard in quartz surface replacement, but the failure mode of DIY here is expensive, not injurious. A homeowner can safely verify the slab thickness, photograph the lot number, and check for level with a 4-foot spirit level. What goes wrong: ordering the wrong thickness and discovering your dishwasher no longer fits beneath the counter; fabricating a sink cutout without proper waterjet or bridge-saw equipment, which blows out the corner radius; or using construction adhesive instead of color-matched epoxy at seams, which telegraphs through within months. Cambria slabs weigh 20-25 pounds per square foot at 3 cm. A 60-inch kitchen island section is a two-person carry even before you factor in stair access or tight ADU doorways. We bring templating equipment, dust containment, and the suction-cup rigging to protect the finished face. Call (909) 373-9612 and we’ll schedule a free estimate with a written price before any work starts.

FAQs