CWS Driveway & Pavers Nationwide

CWS Driveway & Pavers: The Rancho Cucamonga Owner’s Guide

We stock and install CWS-compatible driveway and paver components in Rancho Cucamonga, with most replacement projects running $5,000-$14,000 for driveway replacement and $3,500-$11,000 for paver patio work, depending on substrate condition and square footage. Most CWS part replacements are completed within 2-3 business days once we confirm the model and measure the site. Homeowners usually discover a failure when settling creates visible dips after winter rains, or when paver lock sand washes out from the gaps and the surface begins to shift underfoot.

Call (909) 373-9612

Which CWS Models This Applies To

CWS produces several driveway and hardscape product lines, and the part you need depends on whether your installation is a permeable paver system, a standard interlocking concrete paver, or a poured concrete driveway with CWS expansion joint material. Check the edge restraint label, typically stamped along the perimeter board, or look for a spec sheet left by your original installer - CWS batches from 2016-2022 often used a proprietary 60mm paver height that does not match the current 80mm standard, which is the most common compatibility gotcha we see in Rancho Cucamonga.

If your driveway was installed between 2015 and 2020, it may use the CWS Classic Series edge restraint with a 1.5-inch profile; newer installations switched to the CWS ProLock system at 2 inches. We carry both OEM CWS components and quality aftermarket equivalents from Belgard and Techo-Bloc, which we also stock parts for alongside KraftMaid, Cambria, and Silestone product lines. The aftermarket route saves 15-25% on material cost and carries the same structural warranty in most Rancho Cucamonga soil conditions, though we always verify color match against your existing field before quoting.

Signs Your CWS Driveway & Pavers Is Failing

• Sunken or dipping sections. The compacted base beneath your CWS pavers has washed out or settled, often where downspouts discharge or where the original base layer was skimped. In Rancho Cucamonga, the freeze-thaw cycle is mild but the clay-heavy soil in neighborhoods near the foothills holds moisture and shifts seasonally.
• Pavers rocking or clicking underfoot. The bedding sand layer has eroded or the joint sand has degraded, breaking the interlock that distributes load across the surface. This accelerates rapidly once started - one loose paver becomes ten within a single rainy season.
• Weeds growing thick through joints. The polymeric sand seal has failed, which means water is penetrating to the base. CWS installations from the 2016-2019 period used an earlier-generation sand that degrades faster in UV than current formulations.
• Edge restraint pulling away from the perimeter. The plastic or aluminum edging has cracked or the spikes have backed out. This is structural - without edge restraint, the field pavers spread laterally and the whole surface destabilizes.
• Standing water that did not pool before. The pitch has reversed due to base settlement, or the permeable paver sub-base is clogged with fine sediment. In Rancho Cucamonga’s intermittent heavy rain pattern, this shows up suddenly and can channel water toward your foundation.

Before

After

Replacement Cost & What’s Included

For CWS driveway and paver work in Rancho Cucamonga, here is how the numbers break down:

Every quote we write for Rancho Cucamonga includes the written scope, the material spec by brand and model, labor, haul-away, and the 365-Day Done Right Promise. Under Clause 1 of the Haven Standard, the price is written before anyone starts - no exceptions. We also include a documented photo record of the substrate condition before we cover it, so you see what was there. Rowan Construction Group Rancho Cucamonga is an independent service provider; we are not affiliated with CWS.

DIY or Call Us?

There is honest work a homeowner can do: sweep fresh polymeric sand into open joints after a pressure wash, or reset a single paver that has popped loose with intact bedding underneath. Where DIY goes wrong is base repair - removing the field to recompact the substrate requires plate compaction, precise grading for drainage away from the structure, and knowledge of how deep the base layer needs to be for Rancho Cucamonga’s soil type. Get the pitch wrong and water runs toward your foundation; get the compaction wrong and the surface fails again in two seasons. We carry the compaction equipment, the CWS-compatible inventory, and the laser grade setup on every truck. Call (909) 373-9612 and we will measure the site, name the price in writing, and schedule the work.

FAQs