Tremron Home Additions & ADU Nationwide

Tremron Home Additions & ADU: The Rancho Cucamonga Owner’s Guide

We stock and install Tremron-compatible hardscape components for home additions and ADU projects in Rancho Cucamonga, with typical installed pricing from $45,000 to $130,000 for full additions and $90,000 to $220,000 for detached ADUs. Most homeowners discover their Tremron pavers, retaining wall blocks, or coping stones are failing when settling cracks appear after winter rains, or when surface spalling from Rancho Cucamonga’s freeze-thaw cycles and Santa Ana wind exposure starts flaking the face off walkway or patio stone integrated into their addition footprint. Measure twice, document once, no surprises at closeout.

Call (909) 373-9612

Which Tremron Models This Applies To

Tremron manufactures several product lines that commonly interface with home additions and ADU hardscape in Rancho Cucamonga: the Olde Towne pavers (60mm and 80mm thicknesses), the Stonehurst retaining wall system, the Mega-Lafitt coping units, and the permeable Aqua-Roc series for drainage-compliant ADU parking pads. The critical compatibility gotcha is the chamfer edge profile: pre-2019 Olde Towne runs used a 3/16-inch bevel that doesn’t interlock cleanly with post-2019 1/4-inch spec, and mixing the two in a repair patch creates a trip lip that code inspectors in San Bernardino County flag.

To identify your exact Tremron unit, flip a loose paver and read the mold cavity stamp (usually a two-letter plant code plus date). For retaining wall block, the back-web pattern is the tell: Stonehurst II has a continuous vertical rib, while original Stonehurst shows interrupted ribs. We source OEM Tremron direct from their Florida distribution network, though for discontinued lines we spec Belgard or Techo-Bloc equivalents with matching compressive strength (8,000 psi minimum for vehicular loads, 5,500 psi for pedestrian-only ADU patios). Grant Rowan reviews every substitution against the original spec sheet before it goes on the truck.

Signs Your Tremron Home Additions & ADU Is Failing

• Surface spalling and pitting. The top 3-8mm of the paver face flakes away, exposing the aggregate core. In Rancho Cucamonga, this happens when de-icing salts from nearby street runoff collect on Tremron installations without adequate slope (minimum 1.5% away from structure, per local amendment), or when efflorescence cycles repeatedly wet and dry the surface.
• Joint sand washout between pavers. The polymeric sand bed erodes, leaving gaps that collect water and destabilize the bedding layer. On Tremron permeable installations, this usually means the No. 57 stone reservoir beneath has clogged with fines from our local decomposed granite soils.
• Retaining wall block displacement or rotation. Individual Stonehurst units tilt forward or settle differentially. The cause is almost always inadequate drainage aggregate behind the wall (Rancho Cucamonga’s clay-heavy Cucamonga Formation soils hold water), or a missing geogrid layer on walls over 24 inches tall.
• Coping stone separation from the wall face. The Mega-Lafitt cap units pull away, exposing the concrete bond beam beneath. Thermal expansion in our 110°F summer peaks exceeds the mortar’s flexural capacity when expansion joints were placed too far apart (every 24-30 feet on straight runs, closer on curves).
• Sunken or heaved patio sections. Localized settlement creates pooling or trip hazards. In Rancho Cucamonga’s Etiwanda and North Fontana soil zones, this traces to insufficient compaction of the aggregate base (98% Proctor density required, rarely achieved by hand-tampers on DIY jobs) or tree root intrusion from mature specimens the addition was built around.

Before

After

Replacement Cost & What’s Included

What drives the range: access (can a mini-excavator reach the wall, or are we hand-carrying block through a 36-inch gate?), demolition depth (pavers only, or failed base and bedding layer too?), and whether the original installation included proper drainage that we can tie into. Our quotes itemize Tremron material at distributor cost plus 18% handling, labor at a flat daily rate, and disposal as a separate line. Under Clause 1 of the Haven Standard, that written price is delivered before any work starts. The 365-Day Done Right Promise covers workmanship; Tremron’s limited lifetime warranty against manufacturing defect transfers to the homeowner on our invoice.

DIY or Call Us?

There’s safe owner inspection and then there’s work that needs a crew. You can check: measure the settled area with a 4-foot level to quantify the variance, photograph the mold stamp on any loose paver, and verify whether water pools or drains within 30 minutes of hosing the surface. What goes wrong fast: lifting Tremron pavers without releasing the interlock pattern damages adjacent units; hand-tamping never achieves the 98% Proctor density that prevents re-settlement; and cutting retaining wall block with anything less than a wet saw with diamond blade blows the face. The real risk is structural: a failed retaining wall above 30 inches tall is a collapse hazard, and improper drainage behind rebuilt walls pushes hydrostatic load onto your addition’s foundation. We carry Tremron-compatible inventory on our Rancho Cucamonga trucks for same-day stabilization when safety is immediate. Call (909) 373-9612 to schedule your free estimate.

FAQs